hydraulic gear pump for Construction & Agricultural

hydraulic gear pump for   Construction & Agricultural

A variety of Hydraulic gear pumps sold in our company

0PF Series Gear Pumps - 0PF

1PF Series Gear Pumps - 1PF (1DPF 1APF 1ADPF)

1.5PF Series Gear Pumps - 1.5PF (1.5DPF)

2PF Series Gear Pumps - 2PF (2AD(T)PF 2APF)

3PF Series Gear Pumps - 3PF(3APF 3EPF 3ADPF 3BPF)

3.5APF Series Gear Pumps - 3.5APF                

2[C]P18 Constant Flow Gear Pumps - 2[C]P18

Pumps With Valve

HI/LO Gear Pumps - HI/LO

PTO Gear Pumps - PTO

Introduction of Gear Pump

Gear pumps from FCH Hydraulic have a floating bushing feature with automatic axial clearance compensation.

The bushings are made with special abrasion resistant material providing improved service life.

Precisely machined gears ensure our units provide excellent low noise characteristics. Our cold extrusion motor bodies can endure pressures above 30Mpa.

High strength cast iron front & rear covers also enhance our reliability.

widely used in the industrial, mobile, marine and aerospace industries.

Gear Pump Characteristics

gear pumps are produced in 7 different versions (0P, 1P, 1.5P, 2P, 2.5P, 3P, 3.5P) and in each group different displacements are obtained by changing the gears width

Pressure: FCH offers two pressure ratings, F and G:

Efficiencies: volumetric up to 98%, mechanical up to 93%.

Mountings: flanges, shaft ends and ports.

Seals: Viton seals available.

Integrate: all pumps can be ordered with relief valve and check valve

Minimum Rotational Speed of OPF series:800RPM

Hydraulic Fluid : nonfoaming, antioxidant, noncorrosive and have good lubricating features